Communication Settings Panel
The
Communication Settings
settings and displays RS-232 settings. To configure the TCP/IP settings, click the
button in the
opens.
Figure 95.
NOTE: The hostname is generated from the device name. To change it, see
name
To obtain an IP address automatically:
1.
Select the
2.
Click the
To set a static IP address:
1.
Ensure the
2.
In the
3.
In the
4.
In the
5.
Click the
To reset all communication settings to the default values:
Click the
Reset to Default
•
DHCP is disabled.
•
The IP address is set to 192.168.254.254.
•
The subnet mask is set to 255.255.0.0.
The default gateway is set to 0.0.0.0.
•
To cancel pending changes:
Click the
Cancel
panel (see
Communication Settings
Communication Settings Dialog Box
on the next page.
check box.
Use DHCP
button. The dialog box closes.
Apply
check box is not selected.
Use DHCP
field, enter an IP address.
IP Address
field, enter the subnet mask if required.
Subnet Mask
field, enter the default gateway if required.
Default Gateway
button. The dialog box closes.
Apply
button. The following settings are set:
button. The dialog box closes.
figure
94,
on page 90) configures TCP/IP
3
panel. The
Communication Settings
DXP HD 4K Series • Internal Web Page
Edit
dialog box
Device
92