Dxp 1616 Series - Muting And Unmuting Outputs - Extron electronics DXP 44 HD 4K User Manual

DXP 1616 Series — Muting and Unmuting Outputs
1.
Press and release the
Press the Esc button to clear all selections.
ENTER
Figure 66.
2. Press and release the
lights green.
Press the View
to enter view-only mode.
The View
Figure 67.
3. To select both video and audio for viewing and muting, if necessary, press and release
the
Video
1
1
Figure 68.
NOTE: Until you select an input, the buttons for outputs 1 through 4 light amber if no
inputs are tied, green if no video inputs are tied (only audio is tied), or red if no audio
NOTE: Output mutes are protected when front panel lock mode 2 is selected. You
inputs are tied (only video is tied).
can view the mutes in lock mode 2 but you cannot change them from the front
Outputs 5 through 16 light green if no video inputs are tied (because audio is not
panel (see
supported on these outputs, they do not light red or amber).
page 45).
If front panel lock mode 2 is selected and you try to perform steps 4 and 5, the
actions are ignored. Set the lock mode to 0 to enable changes.
>
button.
Esc
C O N T R O L
VIEW ESC
PRESET
The button blinks once.
Clearing All Selections
<
button to enter view-only mode. The
View
<
button
All untied output buttons light.
VIEW
<
button lights green.
Entering View-only Mode
and buttons.
Audio
Press the Video button to
toggle video on and off.
The button lights green
when selected.
6 7
2 3 4 5
2 3 5 6 7
4
Selecting Video and Audio for Viewing and Muting
Locking and Unlocking the Front Panel (Executive Modes)
Press the Audio button to
I / O
toggle audio on and off.
VIDEO AUDIO
The button lights red when
selected.
INPUTS
8 9 10 11 12 13
8 9 10 11 12 13 14 15 16
OUTPUTS
DXP HD 4K Series • Operation
<
button
View
14 15 16
on
42