Output buttons — The output buttons have the following functions:
C
Primary:
Select outputs.
•
Identify the selected outputs.
•
Secondary:
Save and recall presets (see
•
Mute video and audio output (see
•
Front Panel
on page 41).
De-embed HDMI audio signals from the input.
•
Control buttons — The three Control buttons have the following functions:
D
Enter button — The
•
Primary:
Save changes made on the front panel.
•
Indicate that a potential tie has been created but not saved.
•
Indicate that a preset has been selected to be saved or recalled but the preset
•
action has not been accomplished.
Secondary:
Select 9600 baud rate for the Remote RS-232 port.
•
Set the front panel lock mode (executive mode).
•
With the
•
Preset
configuration mode.
Indicate that the Remote RS-232 port is set to 9600 baud in serial port
•
configuration mode (blinking).
Preset button — The
•
Primary:
Place the switcher in preset saving mode to save a configuration as a preset,
•
and in preset recalling mode to activate a previously-defined preset.
Indicate when preset saving mode is active (blinks) and when preset recalling
•
mode is active (lights steadily).
Secondary:
Select the 19200 baud rate for the Remote RS-232 port.
•
With the
•
Enter
configuration mode.
Indicate that the Remote RS-232 port is set to 19200 baud in serial port
•
configuration mode (blinking).
View button — The
•
Primary:
Place the switcher in view-only mode to display the current configuration.
•
NOTE: View-only mode also provides a way to mute and unmute outputs
(see
Muting and Unmuting Outputs from the Front Panel
page 41).
Indicate that the DXP is in view-only mode.
•
Saving and Recalling Presets
Muting and Unmuting Outputs from the
button has the following functions:
Enter
<
>
,
, and
buttons, place the switcher in serial port
View
Esc
button has the following functions:
Preset
<
>
,
, and
buttons, place the switcher in serial port
View
Esc
button has the following functions:
<
View
on page 37).
on
DXP HD 4K Series • Operation
19