Rack Mounting Procedures - Extron electronics DXP 44 HD 4K User Manual
Dxp hd 4k series
4k hdmi switchers
dxp 88 series
dxp 1616 series
Hide thumbs
Also See for DXP 44 HD 4K:
- Setup manual (60 pages) ,
- User manual (47 pages) ,
- User manual (37 pages)
Table of Contents
Advertisement
Rack Mounting Procedures
To rack mount the DXP HD 4K:
•
DXP 88 series — Using a 19-inch rack shelf kit (available at www.extron.com), mount
the unit to the rack, following the instructions provided with the mounting kit.
DXP 1616 series — These switchers are housed in rack-mountable metal enclosures
•
with mounting flanges that can be attacked to standard 19-inch racks.
Rack mounting the DXP 1616 series
If desired, mount the DXP 1616 series switcher to a rack as follows:
1.
Insert the switcher into the rack, aligning the holes in the mounting flanges with those in
the rack.
2.
Secure the switcher to the rack using the supplied bolts and washers.
Figure 100.
Rack Mounting the DXP 1616 Series to a 19-inch Rack
DXP HD 4K Series • Reference Information
97
Advertisement
Table of Contents
