Installation
This section describes the rear panels of the DXP HD 4K switchers and provides
instructions for cabling. It covers the following topics:
•
•
•
•
Rear Panels
Most of the connectors are on the rear panels of the DXP HD 4K switchers.
4
model.
WARNING:
AVERTISSEMENT : Couper l'alimentation avant de faire l'installation électrique.
ATTENTION:
Rear Panels
Connecting to the LAN Port
Connecting to the Remote RS-232 Port
Connecting to the USB Config Port
on the next page show the rear panels of a DXP 88 series model and a DXP 1616 series
Remove power from the system before making any connections.
•
Use electrostatic discharge precautions (be electrically grounded) when making
connections. Electrostatic discharge (ESD) can damage equipment, although you
may not feel, see, or hear it.
•
Prenez des précautions contre les décharges électrostatiques (soyez
électriquement relié à la terre) lorsque vous effectuez des connexions. Les
décharges électrostatiques (ESD) peuvent endommager l'équipement, même si
vous ne pouvez pas le sentir, le voir ou l'entendre.
Figures 3 and
DXP HD 4K Series • Installation
6