Extron electronics DXP 44 HD 4K User Manual page 21

One of the following screens may open:
Windows XP and earlier — If the following screen is displayed, specify whether
•
you want the computer to connect to Windows Update in order to search the web
for the driver that it needs to communicate with the DXP via the USB port (this is
not necessary if the USB driver already exists on your computer).
Figure 10. Found New Hardware Wizard Opening Screen
Select one of the following radio buttons:
Select the
• Yes, this time only
connect to Windows Update only this one time.
Select
• Yes, now and every time I connect a device
computer to automatically connect to Windows Update every time the DXP is
connected to this USB port.
Select
• No, not this time
at this time (for example, if the driver is already installed).
Windows Update
NOTE: This wizard appears only the first time you connect the DXP to each
USB port. You do not see the wizard again unless you connect the DXP to a
different USB port on your computer.
Windows 7 and later — A pop-up prompt appears on the Windows taskbar
•
informing you that Windows is searching Windows Update for USB software.
If desired, click the
USB
Software Installation
NOTE: If you have uploaded the PCS software to your computer, the USB driver is
already installed and the screens do not appear.
radio button if you want your computer to
if you do not want the computer to connect to
icon to view the progress of the search on the
window.
DXP HD 4K Series • Installation
if you want the
Driver
13