Selecting Lock Mode 2 Or Toggling Between Mode 2 And Mode 0; Selecting Lock Mode 2 Or Toggling Between Mode 2 And Mode 1 - Extron electronics DTP CrossPoint 84 Setup Manual

Basic functions consist of:
• Making ties
• Recalling presets
• Setting audio volume
• Changing Lock modes
Advanced functions consist of:
• Setting audio output mutes
• Setting front panel configuration
The switcher is shipped from the factory in Lock mode 2.

Selecting Lock Mode 2 or Toggling Between Mode 2 and Mode 0

NOTES:
• If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. The
Esc, Video, and Audio buttons blink twice.
If the switcher is in Lock mode 2, this procedure selects mode 0 (unlocks the
•
switcher). The Video and Audio buttons blink twice.
Toggle the lock on or off by pressing and holding the Enter, Video, and Audio buttons
simultaneously until the buttons blink (approximately 2 seconds).
Lock mode 2
CONTROL
ENTER PRESET
Press and hold for 2 seconds.
Lock mode 0
CONTROL
ENTER PRESET
Press and hold for 2 seconds.

Selecting Lock Mode 2 or Toggling Between Mode 2 and Mode 1

NOTES:
•
If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. The
and Audio
•
If the switcher is in Lock mode 2, this procedure selects mode 1. The
butto
Toggle the lock on and off by pressing and holding the Video button and the Audio button
simultaneously for approximately 2 seconds.
Lock mode 1
I/O
VIDEO AUDIO
Press and hold
for 2 seconds.
I/O I/O
VIEW ESC VIDEO AUDIO VIDEO AUDIO
I/O CONTROL
VIEW ESC VIDEO AUDIO ENTER PRESET
buttons blink twice.
ns blink twice.
Lock mode 2
I/O
I/O
VIDEO AUDIO
VIDEO AUDIO
Press and hold
for 2 seconds.
I/O
VIEW ESC VIDEO AUDIO
Video and Audio
CONTROL I/O
ENTER PRESET VIEW ESC VIDEO AUDIO
DTP CrossPoint 84 • Front Panel Operations
Esc, Video,
15