Appendix I. Radius Client; Overview; Radius List Of Supported Rfcs (Requests For Comment - Comtech EF Data CDM-570A Installation And Operation Manual

Appendix I. RADIUS CLIENT

I.1

Overview

Ethernet-based remote monitor and control (M&C) of the CDM-570A/570AL Satellite Modem is
available through the CDM-570A/570AL HTTP (Web Server) Interface, SNMP, and through the
issuance of remote commands and queries via Telnet.
For CDM-570A/570AL Satellite Modems that are equipped with the Optional IP Packet
Processor, additional remote M&C access is available via the Telnet Command Line Interface
(CLI).
Remote Authentication Dial In User Service (RADIUS) is a networking protocol that provides
centralized access authentication, authorization, and management for CDM-570A/570AL Satellite
Modems.
I.1.1

RADIUS List of Supported RFCs (Requests for Comment)

RFC No. Description
"Remote Authentication Dial In User Service (RADIUS)"
2865
Rigby, C., Willens, S., Rubens, A., Simpson, W., June 2000
"PPP Authentication Protocols"
1334
Llloyd, B., Simpson, W.,October 1992
"PPP Challenge Handshake Authentication Protocol (CHAP)"
1994
Simpson, W., August 1996
"Microsoft PPP CHAP Extensions, Version 2"
2759
Zorn, G., January 2000
"Microsoft Vendor-specific RADIUS Attributes"
2548
Zorn, G., March 1999
RADIUS Client
CDM-570A/570AL Satellite Modem with Optional Packet Processor
I–1
Revision 5
MN-CDM570A