Zenith Z-100 PC series Service Manual page 247

Page
2.4
Installation
'~
5. If the computer has a Z-319 high-resolution graphics card installed,
connect its cable to P302 on the Color Video/Floppy Controller Card.
6. Connect the internal monitor cable (Z-160 only) to P303 (see Figure
2.2).
7. Install the disk drive cover assembly (Z-160 only).
8. Connect external device cables to P305 (Composite Video), P306
(RGBI Video), and P307 (Serial Port) at the rear of the computer
as required.
P301 P302 P303 P304
P30S
paD6
P307
Figure 2.2. Card Connectors