Step 4: Measurement Region - Omron F160 Operation Manual

Setting Inspection Conditions
Measurement is performed after the
image is returned to the reference position.
In either case, measurement is performed
with "A" in the measurement region.
2-4-4

STEP 4: Measurement Region

TwoCamera
2-4-4-1 Selecting Region Numbers
TwoCamera
46
Measurement Object Displaced
By making position displacement compensation settings...
Measurement is performed after the measurement
region is moved to compensate for the displacement.
The measurement region is drawn on an image of an acceptable measure-
ment object and the judgement conditions are set. The process will be
explained in this section using the setting operations for a Gravity and Area
measurement as an example.
If Camera 0+1 is selected at Camera mode/Camera, Measurement 0 will be
displayed for Camera 0 and Measurement 1 will be displayed for Camera 1.
Refer to page 33.
The F160 supports 32 measurement regions and 17 measurement methods.
The measurement method can be set separately for each region.
If two Cameras are used, there are 16 regions (0 to 15) for Measurement 0
and 16 regions (16 to 31) for Measurement 1.
Section 2-4
Without compensation, measurement
is performed with "A" outside the
measurement region.