Drawing A Region - Omron F160 Operation Manual

Menu Operations
2-2-4

Drawing a Region

Measurement Measure-
item ment
region
selection
Gravity and Box
area
Gravity and
axis
Gray search
Precise search
Density data Ellipse
Relative search
Rotation search
Labeling
Classification
Defect (region)
Flexible search
Circle
Circum-
ference
Polygon
Edge position Box
Edge pitch
Edge width
OCR for 1
chara
Area (var. box)
Defect (var.
box)
28
Use the following method to draw model regions and measurement regions.
Move the cursor with the Up, Down, Left and Right Keys. Use these keys
together with the SHIFT Key to move the cursor quickly. Press the ENT Key at
the desired positions and press the ESC Key to undo the setting.
The lower right
The whole
coordinates move.
region moves.
ENT
ESC
The whole
coordinates move.
region moves.
ENT
ESC
The whole
region moves.
ENT
ESC
The whole
region moves.
ENT
ESC
Specify the Specify the
first point. second point.
ENT
ESC
Specify two opposite corner points. Refer to the drawing method for "box" shown
above.
Drawing method
ENT
The figure is set.
The lower right
ENT
The figure is set.
The circumference
changes.
ENT
The figure is set.
The circumference
The width changes.
changes.
ENT
ESC
Specify the third
and other points.
ENT
Press the ENTKey twice.
ESC
(Up to 10 points can be specified.)
Section 2-2
ENT
The figure is set.
The figure is set.
ENT