Compatibility With Conversational Menu - Omron F160 Operation Manual

Compatibility with Conversational Menu

1-3

Compatibility with Conversational Menu

Scene Data
(Detection
Conditions)
Scene data
Conversational
Menus
Set the detection conditions.
14
the center position of the model becomes the search coordinates. (The search
coordinates can be changed.)
Model
A
The angle of the measurement object is found in relation to the reference
image (model) for the input image.
Angle
The detection conditions set in Conversational Menu mode can be used in
Expert Menu mode to make detailed adjustments. Once the conditions have
been adjusted with the Expert Menu, you can return to the Conversational
Menu mode and perform measurements using these adjusted conditions.
Region conditions that have been changed or added in the Expert Menu mode
cannot be readjusted using the Conversational Menu mode.
Expert
Menus
Add or adjust the conditions.
Execute measurement.
Section 1-3
Conversational
Menus
Execute measurements.
Register new regions to the
scenes added or changed
using the Expert Menus.
You cannot change the
scene regions added or
changed using the
Expert Menus.