Backing Up Data
5-2-3
Backing Up to Flash Memory
Precaution
The screen for selecting files will be displayed.
Example:
Screen for loading system data
System data Load
/C0
[.
SYSDAT1 SYD
SYSDAT2 SYD
ENT:Select S+ESC:Edit
4.
Select the file to be loaded.
A confirmation message will be displayed.
Example:
Screen when loading system data
Data will be saved.
SYSDAT1.SYD
System data
Execute
5.
Select Execute.
When the loading has been completed, the screen in (1.) will return.
The scene data set to scene group 0 and system data will be saved to the
F160 internal flash memory. If this save operation is performed for scene
groups 1 to 31, the data will overwrite the contents of the files on the Memory
Card.
Flash memory and Memory Card data is loaded each time the F160 is started
up. Therefore, when settings have been changed, be sure to save to flash
memory before turning the power OFF. If the power is turned OFF without sav-
ing, all of the setting changes will be lost.
1.
Display the Basic Screen for Monitor Mode or Run Mode.
0.Scn 0
MON
2.
Move the cursor to MON or RUN and press the ENT Key.
]
00/11/01
00/11/01
00/11/01
↓
Cancel
---- ---ms
Freeze
Section 5-2
267