Step 6: Setting Pixel Skipping - Omron F160 Operation Manual

Area (Variable Box)
SeeAlso
3-1-6

STEP 6: Setting Pixel Skipping

78
1. Select Judgement conditions.
0.Area(var. box)
Binary
Measurement conditions
Left edge
Upper edge
Right edge
Lower edge
Reference registration
Judgement conditions
↑ ↓
The Judgement Conditions Settings Screen will be displayed.
Judgement conditions
Area : 2035.000
[ 2000.000 : 247808.000]
Gravity X : 180.000
[ 0.000 :
Gravity Y : 250.000
[ 0.000 :
End
2. Change the settings.
Refer to page 29 for details on inputting values.
3. Select End.
The settings will be registered and the screen in (1.) will return.
To shorten measurement processing time, change the number of pixels to be
skipped. The greater the skipping setting, the shorter the processing time.
However, the accuracy of the measurement will decrease.
Once the skipping setting has been changed, perform measurements to check
that they can be performed correctly.
Skipping X and Skipping Y
Set how many pixels to skip in the measurement region during measurement.
The default setting is 1, which means that all of the measurement region will
be measured.
Skipping X
Pixel
Skipping Y
511.000]
483.000]
Section 3-1