Menu Operations; Input Devices - Omron F160 Operation Manual

Menu Operations

CHECK
CHECK
CHECK
2-2

Menu Operations

2-2-1

Input Devices

F160-KP Console
SHIFT Key
SHIFT
ESC (escape) Key
ESC
ESC
F1
F4
F7
Function Keys
F1
to F9
24
If it is not displayed, change the display image from freeze to through dis-
play and adjust the position of the inspection object so that it appears in the
center of the monitor screen.
Adjusting the position of the inspection object.
Press SHIFT+ESC Keys. The screen for changing the display image will
be displayed.
2. Focus the Camera.
• Cameras with a light source (including Intelligent Lighting) have lenses
with a fixed focal point. Adjust the Camera position based on the position-
ing distances in the Setup Manual to focus the Camera.
The light level for Intelligent Lighting can be adjusted from the F160. Refer
to page 38.
• When using a Camera Unit, turn the focus ring to focus the Camera.
Change the shutter speed when the object is moving quickly causing the
image to be blurred. Refer to page 37.
Menu operations are performed from either the Console or the serial interface.
ENT (enter) Key
ENT
SHIFT
ENT
TRIG
F3
TRIG (trigger) Key
F2
TRIG
F6
F5
F9
F8
F150-KP Console
ESC (escape) Key
ESC
ESC
SHIFT
SHIFT Key
SHIFT
Section 2-2
TRIG (trigger) Key
TRIG
ENT (enter) Key
TRIG ENT
ENT
Up, Down, Left, and
Right Keys
F150-KP
CONSOLE