Step 4: Changing Detailed Conditions - Omron F160 Operation Manual

Flexible Search
SeeAlso
3-12-4

STEP 4: Changing Detailed Conditions

SeeAlso
154
The Judgement Conditions Settings Screen will be displayed.
Judgement conditions
Correlation : 79 [ 60 :
Position X : 180.000
[ 0.000 :
Position Y : 250.000
[ 0.000 :
End
2. Make the settings.
Refer to page 29 for details on inputting values.
3. Select End.
The settings will be registered and the screen in (1.) will return.
Search-related settings can be changed under Detailed conditions. Change
the detailed conditions when the measurement results are unstable and to
increase processing speed. Normally, these conditions can be left at the
default settings. After changing the settings, perform an object measurement
to check that measurement can still be performed correctly.
1. Select Detailed conditions.
0.Flexible search
Model registration
Search region
Judgement conditions
Detailed conditions
Coordinate mode
The Detailed Conditions Settings Screen will be displayed.
Use the Down Key to scroll through the setting items.
Detailed conditions
Interpolation
Candidate level
Model skipping
Model skipping X
Model skipping Y
Search skipping
Search skipping X
Search skipping Y
↑ ↓
End
2. Change the settings.
Refer to page 29 for details on inputting values.
3. Select End.
The settings will be registered and the screen in (1.) will return.
100 ]
511.000]
483.000]
: ON
: [ 60]
: Auto
: [ 4]
: [ 4]
: Auto
: [ 4]
: [ 4]
Section 3-12