Nc/Plc Interface Signals; General - Siemens SINUMERIK 828D Function Manual

A2: Various NC/PLC interface signals and functions

1.2 NC/PLC interface signals

1.2 NC/PLC interface signals
1.2.1

General

NC/PLC interface
The NC/PLC interface comprises the following parts:
• Data interface
• Function interface
Data interface
The data interface is used for component coordination:
• PLC user program
• NC
• HMI (operator components)
• MCP (Machine Control Panel)
Data exchange is organized by the basic PLC program.
Cyclic signal exchange
The following interface signals are transferred cyclically, i.e. in the clock grid of the OB1, by the basic PLC
program:
• NC and operator-panel-front-specific signals
• Mode group­specific signals
• Channel­specific signals
• Axis/spindle­specific signals
NC and operator-panel-front-specific signals (DB10)
PLC to NC:
• Signals for influencing the CNC inputs and outputs
• Keyswitch signals (and password)
NC to PLC:
• Actual values of CNC inputs
• Setpoints of CNC outputs
• Ready signals from NC and HMI
• NC status signals (alarm signals)
36
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions