Axis/Spindle­specific Machine Data; Setting Data; Channel­specific Setting Data - Siemens SINUMERIK 828D Function Manual

Number Identifier: $MC_
20606 PREPDYN_SMOOTHING_ON
28060 MM_IPO_BUFFER_SIZE
28070 MM_NUM_BLOCKS_IN_PREP
28520 MM_MAX_AXISPOLY_PER_BLOCK
28530 MM_PATH_VELO_SEGMENTS
28533 MM_LOOKAH_FFORM_UNITS
28540 MM_ARCLENGTH_SEGMENTS
28610 MM_PREPDYN_BLOCKS
3.10.1.3 Axis/spindle­specific machine data
Number Identifier: $MA_
32310 MAX_ACCEL_OVL_FACTOR
32431 MAX_AX_JERK
32432 PATH_TRANS_JERK_LIM
32433 SOFT_ACCEL_FACTOR
32434 G00_ACCEL_FACTOR
32435 G00_JERK_FACTOR
32440 LOOKAH_FREQUENCY
33100 COMPRESS_POS_TOL
33120 PATH_TRANS_POS_TOL
35240 ACCEL_TYPE_DRIVE
36000 STOP_LIMIT_COARSE
36010 STOP_LIMIT_FINE
36012 STOP_LIMIT_FACTOR
36020 POSITIONING_TIME
3.10.2

Setting data

3.10.2.1 Channel­specific setting data
Number Identifier: $SC_
42465 SMOOTH_CONTUR_TOL
42466 SMOOTH_ORI_TOL
42470 CRIT_SPLINE_ANGLE
42475 COMPRESS_CONTUR_TOL
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
B1: Continuous­path Mode, Exact Stop, LookAhead
Description
Activation of the curvature smoothing
Number of NC blocks in IPO buffer (DRAM)
Number of NC blocks for block preparation (DRAM)
Maximum number of axis polynomials per block
Number of storage elements for limiting path velocity
in block
Storage for the extended LookAhead
Number of storage elements for arc length function
representation per block
Number of blocks for velocity preparation
Description
Overload factor for axial velocity jumps
Maximum axial jerk when traversing along the path
Maximum axial jerk at the block transition in
continuous-path mode
Scaling of acceleration limitation for SOFT
Scaling of acceleration limitation for G00
Scaling of axial jerk limitation for G00
Smoothing limit frequency for LookAhead
Maximum deviation with compensation
Maximum deviation when rounding with G645
DRIVE acceleration characteristic for axes on/off
Exact stop coarse
Exact stop fine
Exact stop coarse/fine factor and zero speed
monitoring
Delay time exact stop fine
Description
Max. contour deviation during rounding
Max. deviation of the tool orientation during rounding
Core limit angle, compressor
Maximum contour deviation in the compressor
3.10 Data lists
213