Printing The Document Received By Memory Rx Mode - Konica Minolta FK-116 User Manual

Basic FAX Operations
7. Setting the password.
Using the Numeric keys, enter the password
for Memory RX printout. A password is a 4-
digit number ranging between 0000 and
9999.
For example: 6237
Note : If ON time is the same as OFF time, then this machine is always in
the MEM. RX mode.
8. Make sure the correct password has been set, and then press the Yes key.
If you want to change the password, press the No/Clear key, then enter the new
password.
The initial display is changed to the memory
reception display.
NOTE:
How to change the Timer and Password
To change the Timer setting and the registered password, you need to turn OFF the
Memory Reception Mode. This will Print out the received document stored in
memory and cancel the Memory Reception Mode.
Turn OFF the Memory Reception Mode as shown below in "Printing the
Document Received by Memory RX Mode" and cancel the memory reception mode.
Reset the Memory Reception Mode, then enter the Timer and password again.

Printing the Document Received by Memory RX Mode

1. Your machine rings and receives the document. To check that the document has
been stored in memory,
Copy screen
TEXT
2. Press the Utility key 5 times.
The display changes to the "RX
OPERATION".
1
Mem.RX
2-31
PASSWORD =6237
OK = YES
<< M-RX >> 100 %
-SET DOC.FACE UP-
Fax screen
<<M-RX 5P >>
-SET DOC.FACE UP-
Utility
RX OPERATION ?
OK=YES / or 1-8
95%
x 5