Table of Contents
Advertisement
Basic FAX Operations
The machine automatically prints a TX / RX
Result Report.
Press the Stop key.
The document exits and the Error Indicator light goes out, note the reason for failure on
the TX/RX Result Report and retry transmission or check to be sure the fax number is
correct.
Using the One Touch Dial Function
The One Touch Dial function allows you to transmit a document to a particular party
by pressing one of the One Touch Keys that has previously been programmed with
that party's information.
To use this function, you must have previously programmed the One-Touch keys with
the appropriate fax NO. and other data.
For more detailed register procedures, see "Dial Registration" íP 5-13
1. Check that the message display is shown
Fax screen.
If not, press the Copy/Fax key to switch.
2. Place the document face up into the
Document Feeding Tray.
3. Press the One Touch key in which the desired party has been programmed.
For example: One Touch key 08 = BOSTON
The machine starts dialing the fax number and starts feeding the document.
* REDIAL ALL FAILED *
NEW YORK
JAN.01 15:38
-SET DOC. FACE UP-
2-9
Stop
100%
08
H
Advertisement
Table of Contents
