Table of Contents
Advertisement
Basic FAX Operations
If you want to stop the transmission, press the Stop key,
the display appears as below.
Then press the Yes key, the transmission now be
canceled.
4. When the transmission is completed, a
buzzer sounds and the message "TX
COMPLETE" is shown for 2 sec.,
indicating that the document has been
successfully transmitted to the other party.
Then, the initial screen reappears.
To obtain detailed results of the
transmission, print the Activity Report.
í P 8-11
Using the Speed Dial Function
The Speed Dial function allows you to transmit a document to a particular party by
just entering a 2-digit number assigned to that party. To use this function, however,
you must first program each Speed dial NO.(2-digits) with fax number and other
data .
Up to 100 different parties can be registered for Speed Dial.(Speed dial NO.: 00 to
99)
For more details of registering procedure, see " Dial Registration" íP 5-13
Example:
1. Check that the Fax screen is shown.
If not, press the Copy/Fax key to switch.
TX CANCEL?
YES / CONTINUE=NO
* TX COMPLETE*
NEW YORK
TEXT
JAN.01 15:38
-SET DOC. FACE UP-
2-10
Stop
Yes
11
1
100%
Advertisement
Table of Contents
