Table of Contents
Advertisement
Enhanced Utility Functions
4. When transmission is completed, a buzzer
sounds once and a 2-sec message will
indicate that transmission has been
completed successfully. Then, the initial
screen reappears and the TX Result
Report starts printing. íP 8-7
If the Line is busy:
If the line of a particular party is busy, the machine puts that party at the end of the
transmission sequence.
When the initial transmission attempts are completed
for all destinations, the machine redials previously
busy the destinations for transmission of the
document.
If the Transmission was Unsuccessful:
If transmission of a document fails to reach a destination, a buzzer sounds intermittently for
2 sec, the Error indicator lights up.
The TX/RX Result Report prints automatically. For
details, see "TX/RX Result Report.
Up to 9 redial attempts will be made to these
locations.
Program Dial
The Broadcast, Timer TX, Mailbox TX, Polling RX and Relay Initiate functions can be
registered in Program Dial.
Program Dial allows you to transmit a document using a particular transmission function
previously registered. This eliminates job setup for frequently performed tasks.
Program Dial accommodates up to five different transmission functions. One Touch keys
that can be used for this purpose are 24, 25, 26, and 27.
For details of each function, see the relevant page:
Broadcast: í P 4-4
Timer TX: í P 4-11
Mailbox TX: í P 4-13
Polling RX: í P 4-21
NOTE:
Registering a Program Dial into a One Touch key, to which One Touch Dial
or Group Dial or another Program Dial has been previously assigned, will
overwrite the original data.
* TX COMPLETE *
* REDIAL WAITING *
USA
* REDIAL ALL FAILED *
NEW YORK
5-25
Advertisement
Table of Contents
