Table of Contents
Advertisement
Enhanced Utility Functions
The machine starts scanning.
After completely scanning the document, the
machine enters the standby state for timer
transmission while showing the initial screen on
the Message Display.
NOTE:
After pressing the One Touch key in step 2 the machine operation differs
depending on the particular function registered in Program Dial, i.e.,
Broadcast, Timer TX, Mailbox TX, Polling RX, or Relay Initiate. For
details, see the relevant pages explaining the corresponding functions.
Using Batch TX
Overview of the BATCH TX function
You can program your single location one-touch keys to batch documents automatically.
By assigning a batch time to a programmed one-touch key, you can eliminate dialing the
same number several times a day. Your FAX unit calls the other unit at a preset time and
transmits all documents stored in memory during the same call.
How to set up the BATCH TX
1. Press the Utility key 3 times.
2. Press '5' from the Numeric keys. The following message
appears briefly to confirm your selection.
3. Press the one-touch key you want to program.
Before using the Batch feature, you must set
the telephone number on the one-touch key,
otherwise, the display will appear the
message as shown.
4. Enter the batch time using the Numeric keys,
then press the Yes key.
JAN. 04 11:30
-SET DOC. FACE UP-
5 BATCH TX
-SELECT REGIST.KEY-
* NOT REGISERED *
TX TIME =21:00
OK=YES
5-28
T
92%
Utility
x 3
JKL
5
(DEL=NO)
Advertisement
Table of Contents
