Settings Of Rx Operation; Setting Memory Rx Mode; Programming For Memory Rx Mode - Konica Minolta FK-116 User Manual

Basic FAX Operations
2. Press "3" from the Numeric keys. The following
message appears briefly to confirm your
selection.
3. Press or
Enable as the default setting, then press the
Yes key.
4. Press the No/Clear key to restore the initial state.

Settings of RX Operation

NOTE: Some settings of the RX operation is mentioned in other chapter shown as
below:
REDUCTION RX ...........í P 2-18
MAILBOX RX ...............í P 4-15
RX MODE.....................í P 2-19

Setting MEMORY RX MODE

Memory RX Mode stores in memory the contents of a received document. The
document is not printed unless the machine receives a print out command. This feature
provides a means of controlling the documents received through fax. The print
command may be a timer or password.
The print timer command prompts the machine to start printing the document stored in
memory at the specified time. The password print command prompts the machine to
start printing when a password is input.
A print timer command can be used in combination with a password print command.
When a print timer command has been defined and you want a printout to occur before
the set time, you can enter the password to activate the earlier printout provided a
password print command has also been set.

Programming for Memory RX Mode

1. Press the Utility key 5 times.
key to select Disable or
2-29
DEF
3
7 OT-DIAL IN COPY
*DISABLE ENABLE
, & YES
Yes
No
C
Utility
x 5