Table of Contents
Advertisement
About Your Machine
Basic Connection Procedure:
1. Connect the plug of the cord to the telephone
jack of the telephone line.
2. Connect the other plug of the cord to the line
connection on the backside of the machine.
3. Connect the currently used telephone
cord to the TEL connection on the
backside of the machine.
4. Connection is completed.
Connect to Private Branch Exchange (PBX)
When dialing an outside number via a PBX, it may take some time to be connected to
the outside line after dialing out. In such a case, if you enter all the numbers
consecutively, a connection may not be achieved after dialing (Dial Error).
To avoid such an error, enter a pause command after entering the outside line access
number and before entering. By entering a pause, you can avoid the dial error caused
by the PBX system.
The number you dial to access the outside line differs for different PBX systems
1-20
Advertisement
Table of Contents
