Using The Program Dial - Konica Minolta FK-116 User Manual

Enhanced Utility Functions
5. To correct or delete the registered contents, press the
No/Clear key to DELETE the contents or to resume
the previous LCD display.
For example: To program Timer TX for
Program Dial press '2' from the Numeric
keys.
Enter the data according to the Timer setting
procedure.
For example: 12:30
1
Then press Yes key.
Use the numeric keys to input the Fax
number, and then press Yes key. Or use
Function utilities.
6. This completes the programming procedure
for Program Dial.
7. To exit from the registering of Program Dial, press the
No/Clear key twice. Then, the initial screen appears.
If you want to continue registering for Program Dial,
press another unused One Touch key from 24, 25, 26, and 27.

Using the Program Dial

1. Check that the message "SET DOC. FACE UP" is
shown on the Message Display.
If not, press the Copy/Fax key to switch.
2. Press the One Touch key in which the desired
Program Dial has been registered.
For example: One Touch key 27→ Timer TX
ABC OPER
DEF
2
3 0
5-27
ABC
2
2 TIMER TX
TIMER=_ :
TIMER =12:30
OK=YES
Yes
(= ENTER FAX NO.
or FUNCTION
-SELECT REGIST.KEY-
(COMPLETE=NO)
No
C
JAN.01 15:38 100%
-SET DOC. FACE UP-
PROGRAM DIAL 27
TIMER TX