Setting Power Save Off; Setting Print Density - Konica Minolta FK-116 User Manual

Enhanced Utility Functions

Setting POWER SAVE OFF

This function allows you to use Power Save OFF. When this setting is selected the
machine will not automatically enter power saving mode at a specified time.
1. Press the Utility key then the message
"MACHINE SETTING" appears.
2. Press "3" from the Numeric keys. The following
message appears briefly to confirm your
selection.
3. Press or
Enable as the default setting.
Then press the Yes key.
4. Press the No/Clear key to restore the initial state.

Setting PRINT DENSITY

Set the print density according to your needs. There are seven density levels ranging
from Light to Dark.
1. Press the Utility key then the message
"MACHINE SETTING" appears.
key to select Disable or
MACHINE SETTING?
OK=YES / or 1-7
3 POWER SAVE OFF
* DISABLE
,
MACHINE SETTING?
OK=YES / or 1-7
MACHINE SETTING?
OK=YES / or 1-7
5-7
Utility
DEF
3
ENABLE
& YES
Yes
No
C
Utility