Setting Auto Density; Setting Manual Density - Konica Minolta FK-116 User Manual

How To Make Copies

Setting AUTO DENSITY

Set the density level in Automatic density adjustment.
1. Press the Utility key 2 times, then the message
"COPY SETTING" appears.
2. Press "2" from the Numeric keys. The following
message appears briefly to confirm your
selection.
3. Press or
density as the default setting then press the
Yes key.
4. Press the No/Clear key, to restore the initial state.

Setting MANUAL DENSITY

Set the initial value of the manual density level.
1. Press the Utility key 2 times then the display appears
the message "COPY SETTING".
2. Press "3" from the Numeric keys. The following
message appears briefly to confirm your selection.
3. Press or key to select the desired density as
the default setting, then press the Yes key.
key to select the desired
6-20
Utility
COPY SETTING?
OK=YES / or 1-6
ABC
2
2 AUTO DENSITY
LIGHT
, & YES
Yes
No
C
Utility
COPY SETTING?
OK=YES / or 1-6
DEF
3
3 MANUAL DENSITY
LIGHT
, & YES
x 2
DARK
x 2
DARK