Setting Transmission Conditions; Radf; Resolution - Konica Minolta FK-102 User Manual

Setting Transmission Conditions

RADF, Resolution, Quality and Density are displayed when Setting is pressed on the FAX
Basic screen. These can be used to set transmission conditions according to the type of original
to be sent.
1.
Press Setting on the FAX Basic screen.
2.
Press the key desired to be set.
HINT
Initial values can be changed. For detail, see "FAX Screen Set" (p. 10-13).

(1) RADF

This is used to set the manner in which originals are scanned according to the type of original.
There are three types of RADF scanning methods. One sided is set at the time of purchase.
• Cover + 2 sided ....................... Press this when scanning two-sided originals having a
• Two sided ................................ Press this when scanning two-sided originals.
• One sided ................................ Press this when scanning one-sided originals.

(2) Resolution

This is used to set the fineness at which originals are to be scanned. The following three set-
tings are available for Resolution. Normal is set at the time of purchase.
• S-Fine....................................... Press this when scanning especially fine originals con-
• Fine .......................................... Press this when scanning originals containing small
• Normal ..................................... Press this when scanning normal originals.
2-10
cover. Only the first page (cover) is scanned as a one-
sided document.
taining fine graphics or text.
graphics or text.