Installing the Maintenance Kit
Resetting the
Counter
B-22
DP N24, N32 and N40 System Administrator Guide
After the kit is installed, you can reset the counter following this
procedure:
•
Power OFF the printer.
•
Press down both Key 2 <Item Up> and Key 6 <Item Down> at the
same time and Power ON the printer.
•
Keep holding down both keys until this message appears:
*IOT?*
•
Then, within five seconds after this message appears, press down
both the #0 <On Line> and #5 <Menu Down> keys at the same time
until this message appears:
Reset Completed -
Please Reboot
This confirms that the counter has been reset.