Selecting Paper - Xerox DP N24 System Administrator Manual

Selecting Paper

Selecting Paper

2-2 DP N24, N32 and N40 System Administrator Guide
Table 2.1 on page 2-3 lists the size paper, envelopes, and other print
media you can use with all DP N40 input and output bins.
The DP N40 supports paper weights as follows:
• 17-28 lbs. (64-105 g/m
• 17-57 lbs. (64-190 g/m
2
• 17-24 lbs. (64-90 g/m
• The optional 2,500 Sheet Feeder supports 18-24 lbs. (68-90 g/m
Using sizes other than those listed in Table 2.1, or paper not
recommended for laser printers, may result in paper jams and print
quality problems. The following media are unacceptable for use in
the DP N40:
• Excessively thick or thin paper
• Paper that has already been printed on (preprinted letterhead is
allowed)
• Wrinkled, torn or bent paper
• Moist or wet paper
• Curled paper
• Paper with an electrostatic charge
• Glued paper
• Paper with special coating
• Paper unable to withstand a temperature of 150º C (302º F)
• Thermal paper
• Carbon paper
• Paper with paper fasteners, ribbons, tape, etc. attached
• Heavily textured paper
• Label stock with exposed backing sheets
2
) via paper trays
2
) A6 via the 50 Sheet Bypass Feeder
) with duplex
2
)