Xerox DP N24 System Administrator Manual page 122

Ethernet Menu
Table 3.13 Ethernet Menu functions (continued)
Menu Item and Function
Subnet Mask
Set the four byte Subnet Mask address.
The available values are:
xxx.xxx.xxx.xxx
.
Where xxx = 000 to 255
This item only appears if IP Address Res.
is set to Control Panel
For this item (after Step 3), Item Up
moves the cursor to the right through the
displayed Subnet Mask address and Item
Down moves the cursor to the left.
This allows you to change characters
within the string rather than having to
reenter the entire string.
With the cursor displayed under a
character, Value Up increments the
value of that character and Value
Down decrements the value.
3-58 DP N24, N32 and N40 System Administrator Guide
Keystrokes
1. Press Menu Up
Down
2. Press Item Up
Down
3. Press Value Up
Down
. You will see:
.
4. Press Value Up
Down
the character above the cursor. The
value is incremented or
decremented by 1 each time the
key is pressed. Holding down
Value Up
causes continuous scrolling
through the values.
5. To change other characters in the
Subnet Mask address, press Item
Up or Item Down
scroll right or left respectively
through the character string, then
press Value Up
Down
the character above the cursor (as
in Step 4).
6. When you have completed setting
the Subnet Mask address, press
Enter
. You will see:
7. Press On Line
or Menu
M e n u s
until you see:
E t h e r n e t M e n u
or Item
E t h e r n e t M e n u
until you see:
S u b n e t M a s k
or Value
S u b n e t M a s k
xxx.xxx.xxx.xxx
or Value
S u b n e t M a s k
to change the value of
xxx.xxx.xxx.xxx
or Value Down
S u b n e t M a s k
xxx.xxx.xxx.xxx
to
or Value
to change the value of
E t h e r n e t M e n u
S u b n e t M a s k
. You will see: R e a d y
Display
=
=
=
Table 3.13 Page 9 of 11