Resetting A High Frequency Service Item (Hfsi) Counter; Alignment Adjustment - Xerox Versant 80 Press System Administration Manual

The main Tools screen displays.
12. Exit the administrator mode.

Resetting a High Frequency Service Item (HFSI) Counter

Many of the components of the press should be replaced at set print intervals. Each item
that requires regular maintenance or replacement has its own counter and a maximum
number of prints recommended between the maintenance task. Once a counter has
reached its usage limit, the system displays a message that the component needs to be
replaced. The status of the consumable is also shown on the press UI on the Supplies /
Consumables screen from the Machine Status button.
After replacing the customer-replaceable unit (CRU), the system administrator will need
to record the service by resetting the HFSI counter for the item at the press UI.
Note
This manual HFSI reset procedure does not need to be performed after replacing the
Drum Cartridges, Dry Ink / Toner Cartridges, or Dry Ink / Toner Waste Container. The
system will automatically update the HFSI counter for those CRUs.
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select System Settings > Common Service Settings > Maintenance.
4. Use the up/down scroll arrows to access the next few Maintenance screens.
5. Select the Technical Key Operator icon.
6. From the screen that displays, select the row with the consumable part name that
corresponds with the newly-replaced component.
7. Select Reset Current Value.
The system resets the HFSI to 0 and saves the new value to the record log.
8. Verify that the Consumables screen has been reset and the status of the part is now
at 100%.
9. Exit the administrator mode.

Alignment Adjustment

Manual Alignment Adjustment Overview
Tip
Always perform the Auto Alignment Adjustment (SIQA chapter)
any manual adjustments. The majority of the time, the automatic alignment procedure
will correct/fix most alignment issues.
Adjustments can be made to the image based on the alignment output of a document.
Various adjustments can be modified such as: image position, scale, and skew. This can
be achieved through the use of the twenty default adjustment types. In addition, a
specific paper tray can be assigned to a specific adjustment type.
Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
procedure before doing
4-17