Xerox DP N24 System Administrator Manual page 188

Control Panel Messages
Table 6.2 Control Panel messages and corrective actions (continued)
Message
IOT Memory Fail
Power Off/On
I O T N V M F a i l
Power Off/On
J o b n
J o b n
D e l e t e
J o b n
P r i n t
L a s e r F a i l u r e
Power Off/On
6-14 DP N24, N32 and N40 System Administrator Guide
Description/Corrective Action
The Print Engine (IOT) memory has failed and printing cannot resume
ACTION: Power OFF and ON the printer. If this message reappears, contact your
dealer or Olivetti.
Nonvolatile Memory (NVM) has failed on the print engine (also called the
IOT—Image Output Terminal). Printing cannot resume.
ACTION: Power OFF and ON the printer. If this message reappears, contact your
dealer or Olivetti.
This message appears after selecting a secure job to be printed or deleted. If the job
was given a name, that name appears in place of "Job n".
ACTION: Print or delete the job (see the following two messages).
This message appears from the Password Menu. It causes a specific job to be deleted.
If the job was given a name, that name appears in place of "Job n".
ACTION: Press Value Up
Print. Select Delete
This message appears from the Password Menu. It causes a specific job to be printed.
If the job was given a name, that name appears in place of "Job n".
ACTION: Press Value Up
Delete. Select Print
The laser assembly has failed and printing cannot continue.
ACTION: Power OFF and ON the printer. If this message reappears, contact your
dealer or Olivetti.
or Value Down to toggle between
to delete the job and press Enter
or Value Down to toggle between
to print the job and press Enter
Table 6.2 Page 10 of 19
Delete and
.
Print and
.