Xerox DP N24 System Administrator Manual page 202

Paper Jams
Table 6.4 Paper Jam Messages (continued)
Message
Clear Area A,B
Reset Tray 3
Clear Area A,B,C
Reset Tray 4
Clear Area A,B,C
Reset Tray 5
P a p e r J a m
C l e a r A r e a A
6-28 DP N24, N32 and N40 System Administrator Guide
Description/Corrective Action
A paper jam has occurred in Areas A and B.
Use one of the following procedures to clear Area A:
• "Clearing Area A (No Duplex Module)" (page 6-30)
• "Clearing Area A (With Duplex Module)" (page 6-32).
Then use the procedure "Clearing Area B" (page 6-34) to clear Area B. Then reseat
Tray 3.
A paper jam has occurred in Areas A, B, and C.
Use one of the following procedures to clear Area A:
• "Clearing Area A (No Duplex Module)" (page 6-30)
• "Clearing Area A (With Duplex Module)" (page 6-32).
Then use the procedure "Clearing Area B" (page 6-34) to clear Area B.
Then use the procedure "Clearing Area C" (page 6-34) to clear Area C.
Then reset Tray 4.
A paper jam has occurred in Areas A, B, and C.
Use one of the following procedures to clear Area A:
• "Clearing Area A (No Duplex Module)" (page 6-30).
• "Clearing Area A (With Duplex Module)" (page 6-32).
Then use the procedure "Clearing Area B" (page 6-34) to clear Area B.
Then use the procedure "Clearing Area C" (page 6-34) to clear Area C.
Then reset Tray 5.
A paper jam has occurred in Area A.
Use one of the following procedures:
• "Clearing Area A (No Duplex Module)" (page 6-30).
• "Clearing Area A (With Duplex Module)" (page 6-32).
Table 6.4 Page 2 of 3