Xerox DP N24 System Administrator Manual page 102

System Menu
Table 3.10 System Menu functions (continued)
Menu Item and Function
Duplex
Enable or disable duplex printing for
PostScript and PCL jobs. The available
values are:
Off*
Long Edge
Short Edge
This item is only available when the
optional Duplex Module is installed.
For information on the use of Long Edge
and Short Edge printing, see the section
"Duplex (Two-Sided) Printing"
(page 2-25).
Draft Mode
Enable or disable the reduced toner mode
for draft printing. The available values
are:
Off*
On
On
When set to , the printer automatically
reduces the amount of toner by two-thirds
(and prints a draft-quality output).
3-38 DP N24, N32 and N40 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down
until you see:
4. Press Enter
. You will see:
5. Press On Line . You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down
until you see:
4. Press Enter . You will see:
5. Press On Line . You will see:
Display
M e n u s
S y s t e m M e n u
S y s t e m M e n u
D u p l e x
D u p l e x
New Value
S y s t e m M e n u
D u p l e x
R e a d y
M e n u s
S y s t e m M e n u
S y s t e m M e n u
D r a f t M o d e
D r a f t M o d e
New Value
S y s t e m M e n u
D r a f t M o d e
R e a d y
Table 3.10 Page 4 of 7
=
=