Resetting The Feed Roll Cartridge Counters - Xerox Document Centre 255 LP Reference Manual

Resetting the Feed Roll Cartridge counters

NOTE The Paper Feed Roll counter must be reset whenever a Feed Roll is
replaced. If the counters are not reset, paper misfeeds will likely
occur from the paper tray with the newly changed Feed Roll.
Follow this procedure if you are replacing a Feed Roll Cartridge
independently of either a Fuser or Xerographic module.
When Replacing a Feed Roll Cartridge in conjunction with a Fuser
or Xerographic module, the screens on the Touch Screen will
provide the correct procedure.
Replace the Feed Roll at the top of the list because this is the one
with the shortest remaining life.
1. Enter the Tools pathway.
2. Select Supplies Management.
3. Select Feed Roll Cartridge Replacement. The following
4. Open a tray or the Document Feeder and change the cartridge.
5. Close the tray or Document Feeder in which you replaced the
6. Confirm the Cartridge replacement on the pop-up screen. This
7. Select Close.
8. Select Exit Tools.
9. Return the old Feed Roll Cartridge to Xerox.
Page 6 - 32
screen should appear. This screen must be showing to reset a
Feed Roll counter.
cartridge. A pop-up screen will appear.
will reset the counter.
Xerox Document Centre Reference Guide