Using Trays 1, 2 And 3 (If Installed) - Xerox DP N24 System Administrator Manual

Using Trays 1, 2 and 3
(if installed)
1 Pull out the tray (Tray 1 is shown above) until
it stops.
Gently lift up the width guide and slide it all
3
the way until it stops.
If you are replacing paper of the same size, skip
to Step 5 on page 2-6.
Trays 1 and 2 in the printer, and Tray 3 in the optional 2,500 Sheet
Feeder hold up to 500 sheets of 20 lb (80 g/m
the section "Selecting Paper" (page 2-2) for acceptable paper sizes
and weights.
2 Prepare a stack of paper, making sure the tops
of the sheets are aligned.
Press down the gray handle and slide the side
4
guide all the way until it stops.
Loading Paper
2
) paper each. Refer to
Chapter 2: Paper Handling 2-5