Setting A Menu Option - Xerox DP N24 System Administrator Manual

Setting a Menu Option

To set an option or to invoke a function, follow the steps below:
1 Press Menu Up or Menu Down
available submenus until you locate the one you want.
You will see:
Menus
Menu Name
Where Menu Name is the current submenu displayed.
2 Press Item Up or Item Down
the submenu (all submenus except the Password Menu).
You will see:
Menu Name
Item Name
Item Name
Where is the current item displayed. For the Job, Test
and Reset (with the exception of the Language option) Menus, the
bottom line of the display indicates the action to be taken (e.g., Config.
Sheet or PCL Font List).
3 Press Value Up or Value Down
value for this item.
You will see:
Item Name
Current Value
If a list of many values exists (e.g., 1 through 99 for number of copies),
you can scroll quickly by holding down Value Up
Down .
When you see the value you want, press Enter
Chapter 3: Using the Control Panel
Navigating the Menu System
to scroll through the
to scroll through the items of
to select the appropriate
=
*
or Value
to accept it.
3-11