Xerox DP N24 System Administrator Manual page 196

Control Panel Messages
Table 6.2 Control Panel messages and corrective actions (continued)
Message
S N M P R e s e t t i n g
T o n e r L o w
T r a y 1 E m p t y
T r a y 2 E m p t y
T r a y 3 E m p t y
T r a y 4 E m p t y
T r a y 5 E m p t y
V x . x
x x / x x / x x
6-22 DP N24, N32 and N40 System Administrator Guide
Description/Corrective Action
SNMP MIB data base is being reinitialized.
ACTION: None. Please wait.
Toner is getting low in the Toner Cartridge, but printing will continue without
interruption until the cartridge is empty.
ACTION: Replace the Toner Cartridge as soon as possible.
This tray is no longer being used to print because it is empty.
ACTION: Refill the tray if it is to be used again.
This tray is no longer being used to print because it is empty.
ACTION: Refill the tray if it is to be used again.
This tray is no longer being used to print because it is empty.
ACTION: Refill the tray if it is to be used again.
This tray is no longer being used to print because it is empty.
ACTION: Refill the tray if it is to be used again.
This tray is no longer being used to print because it is empty.
ACTION: Refill the tray if it is to be used again.
This message appears when the printer is in power ON diagnostics. The first line
contains the printer software version number. The second line contains creation date
of this printer software version.
ACTION: None, if there is no failure during power ON diagnostics. After other
diagnostic messages, the final message will be that the printers is online
and waiting for data.
Table 6.2 Page 18 of 19