Xerox DP N24 System Administrator Manual page 245

9 Slide the cover open to expose the three
feedrolls for Tray 5.
Installing the Maintenance Kit
10 Replace the three feedrolls. (Refer to Figure
B.1 on page B-17 if necessary.)
Replace and close all paper input trays.
11
Reattach the power cord to the printer.
12
To reset the Maintenance Kit counter
13
• Hold down keys
and power ON the printer.
• Keep holding down keys
message *IOT?* appears.
• Then within five seconds after the message appears,
hold down keys
until the next message Reset Completed - Please
Reboot appears. This confirms the counter reset.
Appendix B: Maintaining the Printer
:
and at the same time
and until the
and at the same time
B-21