Inputting A Value Or Setting For A Service Program; Exiting Service Mode - Gestetner G056 Service Manual

SERVICE PROGRAM MODE

Inputting a Value or Setting for a Service Program

Enter the required program mode as explained above. The setting appearing on
the display is the current setting.
Select the required setting using the "Up/Down arrow" keys, then press the "Enter"
key. The previous value remains if the "Enter" key is not pressed.

Exiting Service Mode

Select "3. End" from the service mode main menu, then press the "Enter" key.
NOTE: To make the settings effective, turn the main switch off and on after exiting
service mode.
G056/G058 5-2 SM