Paper Output Tray; Output Tray Selected; Auto Tray Switching - Gestetner G056 Service Manual

6.6.6 PAPER OUTPUT TRAY

The output tray can be selected using the "System" menu of the user tools. To
select an output tray other than the standard tray, the one-bin shift tray or four-bin
mailbox must be installed.

Output Tray Selected

• If the machine cannot print to the selected output tray, it prints to the standard
tray.
• If paper overflow is detected at the selected output tray, the controller stops
printing until the overflow detector goes off.

Auto Tray Switching

When "Auto Tray SW" is selected in the "System" menu of the user tools and
"Printer Default" is specified as an output tray in the driver, the controller
automatically sends the output to the lowest tray. When that tray fills up, the
controller sends the output to the next lowest tray.
• If a tray becomes full and paper is detected in the next tray, the machine displays
an error and stops printing.
• If all trays become full (overflow detected in all trays), the machine displays an
error and stops printing. This time, all paper must be removed.
SM
4th tray
3rd tray
2nd tray
1st tray
Standard Tray
6-31
CONTROLLER FUNCTIONS
G058D522.WMF
G056/G058