Service Mode Menu ("1. Service Menu") - Gestetner G056 Service Manual

5. SP MODE TABLES
Refer to section 5.1.1 of the manual for the base model (G056/G058) for how to
enable and disable service program mode.
5.1 PRINTER CONTROLLER SERVICE MODE
Service Table Key
Notation
[range / default / step]
DFU

5.1.1 SERVICE MODE MENU ("1. SERVICE MENU")

Service Mode Description
Bit Switch Bit switch
settings
Clear Setting Initialize the
system settings
Print Summary Controller
summary print
Disp Version Display
controller
SM
PRINTER CONTROLLER SERVICE MODE
Example: [-8.0 to +8.0 / 0 mm / 2 mm/step] The setting can be
adjusted in the range ±8, reset to 0 after an NVRAM reset, and the
value can be changed in 2 mm steps.
Denotes "Design or Factory Use". Do not change this value.
Adjusts bit switch settings.
Initializes settings in the "System" menu of the user
mode.
Prints the service summary sheet (a summary of all the
controller settings).
Displays the version of the controller.
5-1
What it means
Function
G073/G074