By-Pass Tray - Gestetner G056 Service Manual

6.4.3 BY-PASS TRAY

[A]
• The by-pass paper sensor [A] detects when paper is placed on the tray.
• The CPU energizes the by-pass feed solenoid [B], then the by-pass feed roller
[C] starts to feed paper to the registration roller [D] through the relay roller [E].
• The by-pass feed roller shaft has two cams [F]. These cams release the bottom
plate to press the stack of paper against the feed roller.
• There is no width sensor.
SM
[B]
G058D103.WMF
6-21
PAPER FEED
[D]
[E]
[C]
[F]
G058D101.WMF
G056/G058
[F]