Image Menu - Gestetner G056 Service Manual

3.3 IMAGE MENU

3.3.1 [Image] – [Erase]
Field
Source
Start Address
Length
Base of Address/
Length
NOTE: If the specified start address and length do not coincide with block
boundaries on the flash memory card, the message below appears.
SM
Card slot number that has a flash memory card currently installed.
A "0 (zero)" appears at default.
To erase the whole card, do not change the setting
Hexadecimal length of the card appears at default.
To erase the whole card, do not change the setting
Do not change the settings.
The default setting is "Hex".
13-7
Description
FUNCTIONS
G056/G058