Gestetner G056 Service Manual page 304

5,9 ENGINE FIRMWARE HISTORY
DESCRIPTION OF MODIFICATION
Firmware modified to correct the following:
1. The spelling of the display for Job
Interrupt in prnlog was change from
"Cancelled" to "Canceled" to conform to
Ricoh MIB (standards).
Added the error message "Can not write
NVRAM information". This message appears
if an error occurs when saving the printer
status data to the NVRAM
!
Firmware modified to corrects the following:
1. When using Signature level 2 on the
NetWare Server, the printer does not
connect to the NetWare Server.
2. When printing out using a CICS
application from an IBM mainframe (e.g.
AS/390), the printer is only able to
output one job due to the lpd protocol
that is unique to CICS.
3. When 50 or more lpq/lprm commands
(w/arguments) are executed from the
time the printer is turned on, the lpd
process at the printer side is interrupted
and the job is not printed out.
G056/G058
G056/G058 NIB FIRMWARE MODIFICATION HISTORY
FIRMWARE
LEVEL
G0585910 F
.
G0585910 G
5-22
Rev. 06/2002
SERIAL FIRMWARE
NUMBER VERSION
June 2000
production
September 2001
production
1.53
1.54
SM