Gestetner G056 Service Manual page 50

FUSING
[E]
[E]: Fusing lamp (! x2)
NOTE: The shorter cable must be at the hot roller gear side.
[F]: Guide plate (3 hooks)
[G]: Hot roller strippers (1 spring each)
[H]: Hot roller (2 C-rings, 1 gear, 2 bushings).
NOTE: Before installing the new hot roller, peel off 3 cm (1 inch) from both
ends of the protective sheet on the new roller.
Remove protective sheet.
G056/G058
G058R506.WMF
[H]
G058R505.WMF
3-12
[F]
G058R510.WMF
[G]
SM