Gestetner G056 Service Manual page 314

Rev. 12/2002
⇒
G073/G074 PRINTER CONTROLLER FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
Corrects the following:
PCL
• Certain characters do not print
• Modified so that some characters in symbol
sets MS Text and Windows Baltic (19L) will
appear exactly as they do with HP printers.
• Modified so that PCLXL unsupported symbol
(6M, 13J and 14J) sets will appear as "XL
ERROR".
Change in Specification:
• If the machine has no HDD option, the PCL
HDD Directory List ( and font source) will not
be printed on the PCL Configuration Page.
• Supports the Status Read back function of the
PCL5e.
• If SSID is not entered, the message "SSID not
entered" will display on the control panel for 3
seconds.
• Supports PCLXL Euro symbol sets (PC-858,
Latin 9, and Roman 9).
Corrects the following:
Polish wording error:
Incorrect: Diskonaly
Correct: Dostateczny
German wording error:
Incorrect: WEP Einstelling
Correct: WEP Einstellung
Changed the default setting of DHCP to ON.
NOTE: There is no change when updating the
firmware. This feature is for the factory default.
Support the new device type of wireless LAN
(IEEE802.11b)..
HTTP and telnet protocols can be
opened/closed using telnet.
NOTE: After making the setting to disable
HTTP, you cannot access the target device
through web browser.
If you want to change this settings, please use
telnet to open HTTP.
When telnet port is disabled, you have to clear
the network settings (Memory Clear for NCS)
to open the telnet port.
SM
FIRMWARE HISTORY
FIRMWARE SERIAL
LEVEL NUMBER
G0735900F June '02
Production
G0735900G Oct. '02
Production
4-9
FIRMWARE
VERSION
1.05
1.07
...continued
G073/G074