Gestetner G056 Service Manual page 283

BULLETIN NUMBER: BULLETIN NUMBER:
BULLETIN NUMBER: BULLETIN NUMBER:
APPLICABLE MODEL: : : : APPLICABLE MODEL
APPLICABLE MODEL APPLICABLE MODEL
GESTETNER – P7026/P7026N GESTETNER – P7026/P7026N
GESTETNER – P7026/P7026N GESTETNER – P7026/P7026N
RICOH – AP2600/AP2600N RICOH – AP2600/AP2600N
RICOH – AP2600/AP2600N RICOH – AP2600/AP2600N
SAVIN – SLP26/SLP26N SAVIN – SLP26/SLP26N
SAVIN – SLP26/SLP26N SAVIN – SLP26/SLP26N
SUBJECT:
DIRTY BACKGROUND ON PRINTOUT
SYMPTOM:
Dirty background may occur at installation, either on the right side or throughout the printout. The following is
an example of dirty background on the right side with A4/LT paper:
Paper Feed Directon
CAUSE:
Dirty background on the right side:
The developer will shift to the left side if the cartridge is tilted as shown below when the sealing tapes are
being removed. This causes excess toner on the right side of the cartridge, which causes the dirty
background on the right side of the printout.
Developer accumulates on
left side of the cartridge.
   
Copyright 2001 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN TECHNICAL SERVICE BULLETIN
TECHNICAL SERVICE BULLETIN TECHNICAL SERVICE BULLETIN
G056/G058 – 003 G056/G058 – 003
G056/G058 – 003 G056/G058 – 003
Configuration Page
System Reference
xxxxx
xxxxx
Paper Input
xxxxx
xxxxx
System
xxxxx
xxxxx
PCL Menu
xxxxx
xxxxx
Host Interface
xxxxx
xxxxx
xxxxx
NOTE:
When removing the tape, place the
machine on a level surface.
1 2 3 4
CONTROL NO 096ABW
08/14/2001 08/14/2001
08/14/2001 08/14/2001
Continued...